(1) 国家科技部一般项目:多波长调频相位细分测距技术研究(2023YFF0612702)  2023-11 至 2026-10, 参与；

(2) 陕西省科技厅重点研发计划项目：面向加工表面在线检测的微观形貌重构研究（2024GX-YBXM-190） 2024-01 至 2025-12, 主持；

(3) 陕西省科技厅重点研发计划项目：工业级激光干涉仪的关键核心技术研发及产业化应用（2025SYS-SYSZD-108） 2025-01 至 2026-12, 参与；

(4) 陕西省自然科学基础研究计划：基于单幅显微图像的切削表面质量在线检测方法研究（2019JM-468） 2019-01 至 2020-12, 主持；

(5) 陕西省自然科学基础研究计划：透明硬脆材料高强度超精密连接的超快激光焊接技术研究（2023-JC-YB-329） 2023-01 至 2024-12, 参与；

(6) 陕西省科技厅产学研协同创新计划：铁路锂电智能维护装备开发（2022YFBT-21-02）2022.3至 2023-3, 参与；

(7) 科研启动项目：基于SFS重建的加工表面质量检测方法研究（102-451120014），主持；

(8) 企业横向课题：净水机箱体开发（102-441224084）, 主持；

(9) 企业横向课题：网约车计程计时装置及其溯源技术开发服务（102-441123069）, 主持；

(10) 企业横向课题：智能巡检装备开发（102-441222004）, 主持；

(11) 企业横向课题：运维管理系统软件开发（121-441218001）, 主持；

近几年，在国内外学术刊物及国际会议上发表文章10余篇，其中SCI收录9篇，EI收录2篇，授权或申请专利4余项。部分成果如下：

(1) 史卫朝, 郑建明, 李言,李旭波,安倩楠. 加工表面双向反射分布函数测量与建模, 光学学报,2018, 38(10): 386-392

(2) Weichao Shi,Jianming Zheng, Yan Li, Xubo Li, Qiannan An. An Accurate Illumination Model ofMachined Surface Based on Micro-Image, International Journal of Pattern Recognition and Artificial Intelligence[J]. 2019, 33(3): 1955004

(3) Shi, Wei-Chao,Zheng, Jian-Ming; Li, Yan,et al. Three-Dimensional Reconstruction Method forMachined Surface Topography Based on Gray Gradient Constraints[J]. APPLIED SCIENCESBASEL, 2019, 3(9): 591-16

(4) Shi Weichao, ZhengJianming, Wang Qi-Long,et al. Characterization of Machined Surface TopographyBased on the Normal Declination Angle of Microfacets[J]. Micromachines,2021, 12: 228

(5) Sheng, Qiang,Zheng Jianming, Shi, Weichao,et al. Measurement and modeling of reflectioncharacteristics of hole inner surface based on endoscopic image.[J].Measurement,2022, 190.

(6) WeiChao Shi,JianMing Zheng, Qiang Sheng, Qilong Wang, Lijie Wang, Qi Li. Illumination modellingfor reconstructing the machined surface topography[J]. The International Journal of Advanced Manufacturing Technology, 2023, 125: 4975-4987

(7) Shi, WeiChao, ZhengJianMing, et al. Development of a low-frequency vibration–assisted turningdevice for nickel-based alloys[J]. International Journal of AdvancedManufacturing Technology,2024, 133(1): 321-333.

(8) Shi, WeiChao, ZhengJianMing, et al. Development of a low-frequency vibration–assisted turningdevice for nickel-based alloys[J]. International Journal of AdvancedManufacturing Technology,2024, 133(1): 321-333.

(9) Chao Peng,JianmingZheng,Ting Chen,Weichao Shi,et al. Feature extraction of the wear stateof a deep hole drill tool based on the wavelet fractal dimension of the currentsignal[J]. Journal of Mechanical Science and Technology,2024, 38(5): 2211-2221.

(10) Zhenyu Wang, JianmingZheng, Mingshun Yang, Weichao Shi, et al. Research on human behaviorrecognition in factory environment based on 3-2DCNN-BIGRU fusion network[J].Signal, Image and Video Processing,2025, 19(1).

(11)Ting Chen, Jianming Zheng,Chao Peng, Weichao Shi, et al. Research and development of anintelligent tapping toolholder using grating encoder pulse difference fortorque detection[J]. Measurement Science and Technology,2025, 36(8): 085106.

(12)史卫朝.基于图像清晰度评价的表面凹凸识别方法[P].陕西省: CN120318307 B,2025-08-12.

(13)史卫朝,郑建明.一种基于单幅显微图像重建的加工表面质量在线检测方法[P].陕西省: CN202110813337.4,2024-02-06.

(14)史卫朝,李思昌,魏莹,郑建明,等.一种钢筘筘齿表面抛光机[P].陕西省: 202121080532.2,2021-05-20.

(15)史卫朝,李思昌,魏莹,郑建明,等.一种钢筘钢带去毛刺装置[P].陕西省: 202121079684.0,2021-05-20.