发表论文：

[1]   Yang Zhaozhao, Li Pengyang*, Li Feizhou, et al. Anticorrosion and lubrication mechanisms of ionic liquid-decorated carbon dots with different structures: Experimental and simulation study[J]. Chemical Engineering Journal, 2025, 519: 164838.

[2]   Yang Zhaozhao, Li Pengyang*, Li Xiaoli, et al. Macroscopic tribological properties and molecular simulation study of carbon quantum dots modified by ionic liquids[J]. Carbon, 2025, 238: 120236.

[3]   Yang Zhaozhao, Li Pengyang, Chen Guoqing, et al. Multiscale investigation of electrically induced friction modulation and interfacial dynamics of ionic liquids with varying chain lengths[J]. Tribology International, 2025, 212, 110970.

[4]   Yang Zhaozhao, Li Pengyang*, Chen Guoqing, et al. Molecular dynamics study of the anticorrosive lubricating effects and interfacial behavior of dicarboxylic acid alcohol amine[J]. Tribology International, 2024, 198: 109891.

[5]   Chen Guoqing, Li Pengyang*, Yang Zhaozhao, et al. Study on the evolution mechanism and concentration regulation of dynamic gradient tribofilm in ionic liquid/nanodiamond synergistic lubrication of titanium alloys[J]. Carbon, 2025, 243: 120566.

[6]   Chen Guoqing, Li Pengyang*, Yang Zhaozhao, et al. In-situ preparation of ionic liquid lubricating additives for enhanced lubrication performance in titanium alloys: Experimental and molecular dynamics simulations[J]. Journal of Industrial and Engineering Chemistry, 2025, 147: 776-792

[7]   Chen Guoqing, Li Pengyang*, Xu Chaoyuan, et al. Influence of anionic alkyl chain on the tribological properties of titanium alloy under water lubrication: Experimental analysis and molecular dynamics simulations[J]. Journal of Colloid and Interface Science, 2025, 680: 105-123.

[8]   Chen Guoqing, Li Pengyang*, Yang Zhaozhao, et al. Tribological properties of YG8/steel friction pair in an aqueous lubrication system with an ionic liquid: Experimental results and molecular dynamics simulations[J]. Tribology International, 2024, 200: 110110.

[9]   Li Pengyang *, Sun Jian, Li Jian, Zhang Ruiyuan, Chen Guoqing. Study on drilling force and export defects of CFRP composites in RULTVD[J]. Journal of Manufacturing Processes, 2025, 34: 880-890.

[10] Sun Jian, Li Pengyang*, Chen Yunshuai, Lu Han, Shao Ding, Chen Guoqing. Sound source identification algorithm for compressed beamforming[J]. Journal of Mechanical Science and Technology, 2024, 38 (4):1627-1634.

[11] Sun Jian, Li Pengyang*, Wang Kai, Zhang Ruiyuan, Chen Guoqing, Zhao Miaomiao, Dai Man, Zhang Yao, Shao Ding. Research on ultrasonic elliptical vibration-assisted cutting system based on double excitation[J]. International Journal of Advanced Manufacturing Technology, 2024, 133 (3-4):1379-1391.

[12] Sun Jian, Li Pengyang*, Chen Yunshuai, Zhang Ruiyuan, Zhao Miaomiao, Chen Guoqing, Lu Han, Dai Man, Shao Ding. Research on multi-scale hysteresis constitutive model of giant magnetostrictive materials considering multi-field coupling[J]. Journal Of Magnetism And Magnetic Materials, 2024, 597: 172034.

[13] Xu Pengxiang, Li Pengyang*, Chen Yunshuai, Wang Bo, Lu Han, Xu Chaoyuan, Dai Man. Optimization of process parameters for laser cladding Stellite6 cobalt-based alloy[J]. Materials Today Communications, 2024, 38:108430.

[14] Zhang Zhimin, Li Pengyang*, Huang Qiuhong, Zhu Lingjian. Internal surface inspection method under linear structured light illumination based on dual non-coaxial optical paths[J]. Measurement Science and Technology, 2024, 35 (7): 075010.

[15] Sun Jian, Li Pengyang*, Chen Yunshuai, Lu Han, Chen Guoqing, Shao Ding. Experimental study of surface integrity in ultrasonic vibration-assisted milling of GH4169 nickel-based superalloy[J], International Journal of Advanced Manufacturing Technology, 2023, 129(11-12): 5047-5058.

[16] Chen Yunshuai, Li Pengyang*, Sun Jian, Shang Miao and Shao Limin. Fractal Model of Contact Thermal Stiffness[J]. Machines, 2022, 10, 464.

[17] Sun Jian, Li Pengyang*, Mao Jin, Yang Mingshun, Shao Ding, Chen Yunshuai, Li Jian, Wang Kai. Performance analysis of beamforming algorithm based on compressed sensing[J]. Applied Acoustics, 2022, 198:108987.

[18] Chen Yunshuai, Li Pengyang*, Sun Jian and Chen Guoqing. Domain Switching-Based Nonlinear Coupling Response for Giant Magnetostrictive Materials[J]. Materials, 2023, 16: 4914.

[19] Chen Yunshuai, Pengyang Li*, Sun Jian, Li Zhe, Chen Guoqing. Loss-based structures and frequency dependencies of giant magnetostrictive materials for rotary ultrasonic machining applications [J]. Journal of Science: Advanced Materials and Devices, 2023,8(3):100609.

[20] Sun Jian, Li Pengyang*, Zhang Shen, Chen Yunshuai, Lu Han, Chen Guoqing, Shao Ding. Experimental study of surface integrity in ultrasonic vibration–assisted milling of GH4169 nickel-based superalloy[J]. The International Journal of Advanced Manufacturing Technology, 2023, 129: 5047-5058.

[21] Sun Jian, Li Pengyang*, Zhang Shen, Chen Yunshuai, Lu Han, Chen Guoqing, Shao Ding. Simulation and experimental study of ultrasonic vibration-assisted milling of GH4169 high temperature alloy[J]. Alexandria Engineering Journal, 2023, 73: 403-413.

[22] 曹利平，周 玄，杨天峰，崔 燕，李鹏阳*. 大型柴油机缸体零件在机测量与分析, 西安工业大学学报，2022，42（6）：559-564.

[23] Li Pengyang*, Zhai Yanfei, Huang Shikun, Wang Quandai, Fu Weiping and Yang Hongping. Investigation of the contact performance of machined surface morphology [J]. Tribology international, 2017, 107：125-134. (SCI)

[24] Li Pengyang*, Chen Yunshuai, Li Wei, Sun Jian, li Jian, Wang Kai, Wang Quandai. On the influence of loading force on the vibration characteristics of a giant magnetostrictive transducer[J]. Alexandria Engineering Journal, 2022, 61:10939-10951.

[25] Li Pengyang*, Chen Yunshuai, Li Wei, Sun Jian, Li Jian and Wang Kai. Design of Longitudinal-Bending Coupled Horn of a Giant Magnetostriction Transducer[J]. Actuators, 2022, 11, 110.

[26] 李鹏阳*，刘强，李伟，周玄，王李梦，王权岱，袁启龙. 超磁致伸缩超声换能器结构研究[J]. 振动与冲击，2021，40（11）：196-201.

[27] 李鹏阳*，刘强，李伟等. 超磁致伸缩超声换能器结构研究，振动与冲击，2021，40（11）:196-201.（EI）

[28] 李鹏阳*，杨文辉，曹利平，乔卫杰，杨天锋. 圆盘类零件几何量机器视觉测量技术研究，西安工业大学学报，2020,40(06)：598-604

[29] Li Pengyang*, Liuqiang, Zhouxuan, Xu Guangyao, Li wei, Wang Quandai, Yang mingshun. Effect of Terfenol-D rod structure on vibration performance of giant magnetostrictive ultrasonic transducer[J]. Journal of Vibration and Control, 2020, 10(5): 1-9. (SCI)

[30] LI Pengyang*，LIU Qiang，ZHOU Xuan，et al. Design and magnetic field uniformity of giant magnetostrictive ultrasonic transducer for progressive sheet forming［J］.（EI） Transactions of Nanjing University of Aeronautics and Astronautics，2020,37(3)：393⁃402. (EI)

[31] 李鹏阳*，曹利平，何进，刘强，王红新，李言. 基于ＤEFORM-3D的GCr15轴承钢车削残余应力的仿真研究. 西安理工大学学报，2018, 34（4）：468-474.

[32] Li Pengyang*, Zhou Lingxia, Cui Fangyuan, Wang Quandai, Guo Meiling, Zhai Yanfei, Li Yan, Hua Dengxin. Elasto-plastic analysis of the contact region between a rigid ellipsoid and a semi-flat surface[J]. Advances in Mechanical Engineering, 2018, 10(9): 1-8. (SCI)

[33] Li Pengyang*, Liu Qiang, Li Shujuan, Wang Quandai, Zhang Dongya, Li Yan. Design and numerical simulation of novel giant magnetostrictive ultrasonic transducer, Results in Physics, 2017,7:3946-3954. (SCI)

[34] 李鹏阳*，刘强，周玲霞. 超磁致伸缩超声换能器设计分析, 应用基础与工程科学学报, 2017, 25(5): 1065-1075. (EI)

[35] Li Pengyang*, Zhai Yanfei, Huang Shikun, Wang Quandai, Fu Weiping and Yang Hongping. Investigation of the contact performance of machined surface morphology [J]. Tribology international, 2017, 107：125-134. (SCI)

[36] Li Pengyang*, He Jin, Liu Qiang, Yang Mingshun, Wang Quandai, Yuan Qilong and Li Yan. Evaluation of forming forces in ultrasonic incremental sheet metal forming [J]. Aerospace Science and Technology, 2017, 63：132-139. (SCI)

[37] 李鹏阳*，赵智渊，李伦，李淑娟.横向超声激励对金刚石线锯切割单晶SiC切割速度及切割机理影响, 人工晶体学报,  2017, 46(6): 1064-1063.

[38] Li Pengyang*, Liu Qiang, Hui Ye, Wang Quandai, Fu Weiping, Li Yan. Analysis of contact performance of real machined surface based on finite element method[J]. Tribology Online, 2016, 11 (1)：161-68. (EI)

[39] Li Pengyang*, Huang Shikun, Xu Haifeng, Li Yuxi, Hou Xiaoli, Wang Quandai, Fu Weiping, Fang Yingwu. Numerical simulation and experiments of titanium alloy engine blades based on laser shock processing[J]. Aerospace Science and Technology, 2015, 40：164-170. (SCI)

[40] 李鹏阳*，徐海峰，安武润，王权岱，傅卫平，杜彬. 板料单点渐进成形力仿真与实验研究. 应用力学学报, 2015, 32(6):1062-10688.

[41] 李鹏阳*，陈欢，王世军，王权岱，傅卫平. 考虑摩擦热的弹塑性平面接触应力及塑性应变分析[J]. 西安工业大学学报，2015, 35(10)：788-794.

[42] Li Pengyang*, Liu Qiang, An Wurun and Li Shujuan. Finite Element Simulation of Ultrasonic Incremental Forming. Materials Science Forum, 2016,836-837:452-461（EI）.

授权发明专利：

[1]      李鹏阳，李伟，王权岱，陈云帅. 一种空间三向力加载试验装置，2023-09-29，中国，ZL 202110250890.1

[2]      李鹏阳，孙健，曹利平，陈云帅，邵丁，李剑，王凯，陈晓丽. 一种双棒形水冷超磁致伸缩超声振动装置,2023-07-14，中国，ZL 202210451862.0

[3]      李鹏阳，卫培梁，王权岱.一种具有减摩和提高油膜承载力的表面织构及其制作方法,2021-12-31，中国，ZL 202020428627.2

[4]      李鹏阳,许光耀. 双棒型超磁致伸缩换能器及双棒型超磁致伸缩主轴, 2021-08-06,中国, ZL 201910758256.1

[5]      李鹏阳，刘强，许光耀，杨明顺，袁启龙. 一种双棒型超磁致伸缩超声振动装置，2021-04-06, 中国, ZL201811452429.9.

[6]      李鹏阳，刘强，袁启龙. 一种具有温度过载保护功能的超声振动装置，2021-02-12, 中国, ZL201811014826.8.

[7]      李鹏阳，刘强，许光耀. 超磁致伸缩超声主轴，2020-09-25,中国, ZL201810252618.5.

[8]      李鹏阳，刘强，杨明顺. 超磁致伸缩超声刀柄,2020-03-31, 中国, ZL201811014829.1.

[9]      李鹏阳，刘强. 超磁致伸缩超声换能器, 2020-5-22, 中国, ZL201810287824.X.

[10]   李鹏阳，刘强. 一种超磁致伸缩旋转超声振动装置, 2019-11-22，中国，ZL201711260226.5.

[11]    李鹏阳，刘强，李言，杨明顺，袁启龙，郑建明; 肖继明. 一种纵‑扭复合振动换能器，2017-07-28，中国，ZL201610130086.9 .

[12]   李鹏阳，陈欢，李言，杨明顺，袁启龙，李淑娟，王凯. 一种板料渐进成形的超声振动主轴装置，2017-09-26，中国，ZL201610130518.6.

[13]   李鹏阳，徐海峰，李言，杨明顺，袁启龙. 双点异面振动增量成形装置,2016-06-22, 中国, ZL201410056614.1.

获奖：

中国发明协会发明创业奖创新奖二等获得者。